Generador diesel para soldadores
Description
Perfect welding
The unit can achieve a perfect waveform of the welding voltage. The non-fluctuating welding current produces a high quality welding operation.
Compact design
A lightweight and compact design improves on-site maneuverability and saves sorage space. It has four durable casters tofaclitate movement.
Perfect quality
The welding arc is super smooth to get perfect quality welds. The welding current regulation is broad to accommodate a variety of welding rods.
The portable welding generator series is a daul use until featuring welding and power generation. Power ranges from 1.8kw to 4.2kw. Welding current ranges from 50A to 300A. PME supply two types of welding generator, one is full-power output unit, the function is changed between supply full power of generator. The other is half-power unit. The machine only can supply half power of the generator.
The power supply for welding is self-driven. It can be used in a host of applicationsrailraoding, highway construction, port operations, oil fields, chemical plants, building construction, agriculture and many more. Self-excitation and constant voltage enhance the generator performance. The lightweight and compact design faclilitates on-site maneuverability and saves storage space.
Welder Generator Parameters
| Modelo | PME6500CLE-W | PME6700SE-W | PME8000CLE-W |
|---|---|---|---|
| Rated frequency [Hz] | 50/60 | 50/60 | 50/60 |
| Rated power [kw] | 2.0/2.2 | 2.0/2.2 | 3.0/3.3 |
| Rated voltage [v] | 220, 230, 240 | ||
| Factor de potencia | 1 | ||
| Fase | Single phase | ||
| Welding voltage [v] | 25 | 25 | 25 |
| Rated welding current [A] | 160 | 160 | 200 |
| Current adjusting range [A] | 60-180 | 60-180 | 60-220 |
| Welding load ratio | 60% | 60% | 60% |
| Motor | PME186FAE | PME186FAE | PME192FE |
| Tipo de motor | Single-cylinder, vertical, air-cooled, 4-stroke, diesel engine | ||
| Sistema de arranque | Arranque eléctrico | ||
| Capacidad del depósito de combustible [L] | 12.5 | 14.5 | 12.5 |
| N.W/G.W [kg] | 115/120 | 158/163 | 122/127 |
| Paquete (L x A x A) [cm] | 74x51x67 | 95x57x77 | 74x51x67 |
Mantenimiento
| Cada uso | 1er mes o 20 Hrs. | Cada 3 meses o 100 Hrs. | Cada 6 meses o 500 Hrs. | Cada año o 1000 Hrs. | |
|---|---|---|---|---|---|
| Comprobación y llenado de combustible | √ | ||||
| Descarga de combustible | √ | ||||
| Comprobación y llenado de aceite | √ | ||||
| Comprobar la fuga de aceite | √ | ||||
| Comprobar y apretar la tornillería exterior | √ | ||||
| Cambiar el aceite | √ | √ | |||
| Cambiar el filtro de aceite | √ | ||||
| Cambiar el elemento del filtro de aire | √(1) | ||||
| Filtro de combustible limpio | √(2)(cambio) | ||||
| Comprobar la bomba de aceite de alta presión | √(2) | ||||
| Comprobar boquilla | √(2) | ||||
| Comprobar el tubo de combustible | √(2) | ||||
| Ajustar las aberturas de entrada y salida de aire | √(2) | √(2) | |||
| Compuerta de entrada y salida de aire de rectificado | √(2) | ||||
| Cambio de segmentos | √(2) | ||||
| Comprobar la solución electrolítica del acumulador | Cada mes | ||||
| Comprobar el cepillo eléctrico y el anillo deslizante | √(2) | ||||
| Comprobar la resistencia del aislamiento | Dejar de trabajar es más de 10 días | ||||
Se realiza cada mes indicado o cada intervalo de horas de funcionamiento, lo que ocurra primero.
(1)Mantenimiento más frecuente cuando se utiliza en zonas polvorientas.
(2)Estos elementos deben ser reparados por su distribuidor a menos que usted disponga de las herramientas adecuadas y tenga conocimientos mecánicos. Consulte los procedimientos de mantenimiento en el manual.
Spanish 
English 
Russian 
French